ProCab HDMI A male > HDMI A male, HDMI2 Active 4K, 15 m

ProCAB CLV220A HDMI 2.0 Cable

The CLV220A is an optical HDMI 2.0 cable designed for permanent installations. It is capable of transmitting resolutions up to 4K @ 60Hz 4:4:4 with a bandwidth of 18Gbps via optical fiber, eliminating the possibility of electronic interference. The interchangeable connectors make it easy to detach and reassemble the connectors, allowing the cable to be installed through holes and small pipes with diameters as small as 25 mm.

The CLV220A comes with a 1-meter USB A to USB Micro B cable, which is only needed when the HDMI port on the transmission side provides insufficient power (typically required when power is transmitted from the receiver end (RX) via the CLV220A cable).

Most general HDMI sources provide sufficient voltage, making the additional cable unnecessary. However, typical applications where this may be needed include streaming media player boxes that may not supply sufficient power through their HDMI output.

Key Features:

• HDMI 2.0
• Ultra HD 4K 2160p
• Fiber optic technology
• Flexible outer jacket
• Exchangeable connectors
• HDMI ARC up to 50 meters

Available Lengths:

• CLV220A/10 - 10 meters
• CLV220A/15 - 15 meters
• CLV220A/20 - 20 meters
• CLV220A/30 - 30 meters
• CLV220A/40 - 40 meters
• CLV220A/50 - 50 meters
• CLV220A/70 - 70 meters
• CLV220A/100 - 100 meters

Technical Specifications:

• Strength Test Bending Radius: 20 mm
• Tensile Strength Test: 25 kg
• Connector Bending Test: > 10,000 cycles
• Connector Pull-Out Force: 2 kg
• Inner Conductor Material: TC 11 x 0.08 mm (Ø) (OFC), TC 19 x 0.08 mm (Ø) (OFC), TC 30 x 0.08 mm (Ø) (OFC), TC 41 x 0.08 mm (Ø) (OFC)
• Fiber: 50/125 OM3 / Fiber
• Section: 0.05 mm², 0.08 mm², 0.14 mm², 0.25 mm²
• Number of Conductors: 12
• Insulation Material: PE 0.9 mm (Ø), PE 1 mm (Ø)
• Conductor Twisting: Yes
• Shielding: Aluminium foil Al-mylar, 100% coverage - 25% Overlap
• Drain Wire: TC 11 x 0.08 mm (Ø) (OFC)
• Overall Shielding: Aluminium foil Al-mylar, 100% coverage - 25% Overlap
• Outer Jacket Material: LSHF 4.5 mm (Ø)
• Colors: Black