Synco WAir G2 wireless microphone system w/display

Synco G2 A1 Wireless Microphone System with 1 Transmitter

SYNCO G2 (A1) is the best budget wireless lavalier microphone system from the 2nd generation G series. Similar to the SYNCO G1, it is available in two different sets with 1 or 2 transmitters: G2 (A1) and G2 (A2).
The new wireless microphone comes from the G1 (A1) and is reborn with a display to show all major indicators.

It continues to process input sound via patented technology and transmits clean, clear audio based on 2.4 GHz digital transmission technology.
With 1 receiver and 1 transmitter, the G2 (A1) is a dual-channel wireless microphone system, especially suitable for recording two sound sources, and is the best budget microphone for a wide range of applications for content creation.

Algorithm 2.0 Improves Transmission Stability and Security
Syncoder™ Encrypted Transmission Algorithm 2.0 improves signal stability of the digital microphone system within 164ft / 50m (Line-Of-Sight) and 98ft / 30m (Non-Line-Of-Sight) effective range. It uses FHSS (Frequency Hopping Spread Spectrum) technology to detect its own location and automatically switches to the optimal frequency to avoid signal conflicts. This also helps protect privacy and reduce interference.

Integrated Signal Processing Leads to Minimal Audio Delay
The Digital Signal Processor (DSP) chip in the best microphone optimizes the signal from input to output directly. Full synchronization of signal capture, processing, and delivery guarantees transmission with near-zero latency and high-quality sound production, perfect for immediate use and excellent for live broadcasting.

2-in-1 Fast Charging Supports Continuous Recording
The 2-in-1 charging solution allows charging of this lavalier microphone system (1TX + 1RX) simultaneously with a power source. It only takes 40 minutes to reach 50% charge and 1 hour to reach 80%. The extended capacity battery supports 8 hours of continuous work when fully charged.

Small Features Run to Make Big Differences
A button is set to turn off the microphone system temporarily, useful during team communication, device setup, etc., rather than powering off the system entirely. The low cut function, gain control, and real-time monitoring provide a wider range of adjustments, allowing the microphone system to operate under more diverse conditions.

Microphone Specifications

• Form Factor: Built-in/External Mic
• Sound Field: Mono
• Polar Pattern: Omnidirectional
• Frequency Range: 50Hz-20KHz
• Sensitivity: -40dB (±3 dB, re 1V/Pa at 1KHz)
• Max. SPL: 135dB SPL (at 1KHz)

Transmitter (TX) Specifications

• Wireless Transmission: Digital 2.4GHz
• RF Frequency Band: 2400-2483.5MHz
• Frequency Response: 20Hz-20KHz
• Working Distance: 164ft/50m (LOS area), 98ft/30m (NLOS area)
• Mounting: Pocket Clip
• Audio Input: 1/8" / 3.5mm TRS Mic Input
• Audio Input Level: 1V (0dBV)
• Power Requirements: 3.3V-4.7V
• Battery Type: Built-in Lithium Battery, 500mAh
• Battery Charging Time: 1.5h
• Battery Life: 8h
• Display: TFT Screen
• Dimensions: 52×42×17mm
• Material: Plastic
• Weight: 39g

Receiver (RX) Specifications

• Wireless Transmission: Digital 2.4GHz
• RF Frequency Band: 2400-2483.5MHz
• Approximate RF Sensitivity: -81dBm
• Working Distance: 164ft/50m (LOS area), 98ft/30m (NLOS area)
• Mounting: Pocket Clip
• Number of Audio Channels: 2
• Audio Output: 1/8” / 3.5mm TRS Mic Output, 1/8" / 3.5mm TRS Headphone Output
• Gain: 0-5 Level
• Audio Output Level:
  • Line Out: 1V
  • Monitoring: 25-30mW
• Power Requirements: 3.3V-4.7V
• Battery Type: Built-in Lithium Battery, 500mAh
• Battery Charging Time: 1.5h
• Battery Life: 8h
• Display: TFT Screen
• Dimensions: 52×42×17mm
• Material: Plastic
• Weight: 39g