ProCab Active 8K Optical HDMI 2.1 Cable

ProCab CLV310A

The CLV310A is an active optical HDMI 2.1 cable designed for transmitting next-generation 8K video content. It can transmit resolutions up to 8K (7680 x 4320p) 4:4:4 at 60 Hz with a bandwidth of 48 Gbps via OM3 optical fiber technology, eliminating the possibility of electronic interference. It is backward compatible with HDMI 2.0 and HDMI 1.4, ensuring an optimal and future-proof solution for any installation.

Ready for future HDCP 2.3 content encryption, compatible with all current and new HDR standards (HLG, HDR-10 and HDR-10+, Dolby Vision, Perceptual Quantizer, and SL-HDR-1), and compatible with eARC HD audio standards.

The Semi-Lock™ function on the HDMI connector increases the pull-out strength of the connector and prevents loose or unstable connections, reducing unwanted signal loss or interruptions.

PHYSICAL CHARACTERISTICS

• Strength test Bending radius: 20 mm
• Tensile strength test: 25 kg
• Connector bending test: > 10000 cycles
• Inner conductor material: TC 11 x 0.08 mm (Ø) (OFC), TC 19 x 0.08 mm (Ø) (OFC), TC 30 x 0.08 mm (Ø) (OFC), TC 41 x 0.08 mm (Ø) (OFC)
• 50/125 OM3 / Fiber (4x)
• Section: 0.05 mm², 0.08 mm², 0.14 mm², 0.25 mm²
• Number of conductors: 12
• Insulation material: PE 0.9 mm (Ø), PE 1 mm (Ø)
• Conductor twisting: Yes
• Shielding: Aluminium foil Al-mylar, 100% coverage - 25% Overlap
• Drain wire: TC 11 x 0.08 mm (Ø) (OFC)
• Overall shielding: Aluminium foil Al-mylar, 100% coverage - 25% Overlap
• Outer jacket material: PVC 4.5 mm (Ø)
• Colors: Black

SUPPORTED FEATURES

• Transmission encoding: Uncompressed AOC
• End to end latency: 10 µs
• Maximum transmission bit rate: 48 Gbps (4-core – 12 Gbps per core)
• Orientation: Uni-directional
• Connectors: 2 x HDMI Type A, 19-pin male A type with Semi-Lock™
• Supported video resolutions:
  • 1920 x 1080p @ 240Hz
  • 2560 x 1440p @ 240Hz
  • 3840 x 2160p @ 144Hz
  • 5120 x 2880p @ 60Hz
  • 7680 x 4320p @ 60Hz
• Supported standards: DCI, Static HDR, HDR10+, Dolby Vision, HLG, SL-HDR1, PQ, BT.2020, BT.2100
• Audio formats: 2 Ch PCM, Multichannel LPCM, DTS-X, Dolby Atmos
• Maximum sampling rate: 192 kHz
• Maximum audio channels: 32
• Enhanced Audio Return Channel: Supported
• HDCP Pass-through: 2.3 Supported
• EDID Pass-through: RX > TX
• Ethernet: 100 Mbps supported
• Consumer electronics control (CEC): Bidirectional supported
• Auto Low Latency Mode (ALLM): Supported
• Variable refresh rate (VRR): Supported

Power

• Power supply: Passive, 4.5V ~ 5.5V VCC (from connected source)
• Max power consumption: 250 mW